| Customization: | Available |
|---|---|
| Material: | Steel |
| Product Name: | Two Storey Chicken House Galvanized Steel Structur |
|
Still deciding? Get samples of US$ 200/Square Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Chicken house with the main framwork is steel structuream, which is composed of Main feeding system, chain feeding system, Nipple drinking system, Ventilation system, Environmental control system, and Spraying system.
Column and Beam:galvanized Q235, Q345 H section steel or square tube
Roof: corrugated steel sheet with insulation or sandwich panel
Wall: Wire meshes with curtain system or sandwich panel
1.rust protection, acid resistance, good insulation performance.
2.easy structure, high efficiency, lower cost, great flexibility.
3.wind protection, lighting and shock protection,environment friendly.
2.Automatic equipment Part
1) Main feeding system
This system delivers feed from the silo to the hopper in the poultry house. There is one feed sensor at the end of main feed line which control the motor on and off automatical to release automatic delivery.
3. Steel structure poultry house Introduction:
The load bearing parts for steel structure workshop are mainly steel structures, including steel columns, steel beams, steel structural basements, bracing systems for wall and roof. Steel workshops are divided into Light Steel Workshops and Heavy Steel Workshops. The Main Structure is usually made of Q345 Steel while the Purlins and Bracing System are made of Q235 Steel. They are the most common steel materials used for steel structure in China.
Advantages of Steel Structural Workshop:
1). Large span for great strength with light deadweight;
2). Short finishing time and low cost;
3). Fireproof and rustproof;
4). Convenient to assemble or disassemble.
4. Main parts and materials of steel structure poultry house:
| No. | Item | Spec. | Grade | Unit. |
| 1 | Main Steel System | |||
| Main Steel Frame | Q345B | T | ||
| Manufacture charge | T | |||
| 2 | Secondary part Steel system | |||
| Roof purlin | C180*70*20*2.5 | Q235B | T | |
| Wall purlin | C180*70*20*2.5 | Q235B | T | |
| Brace between column, Horizontal support | Angle steel Φ20 | Q235B | T | |
| Knee bracing | Steel Angle L50*4 | Q235B | T | |
| Tie bar | Square tubeΦ114*2.5 | Q235B | T | |
| Support bar | Round tubeΦ32*2.5 | Q235B | T | |
| Brace between purlin | Round barΦ12 | Q235B | T | |
| 3 | Roof System | |||
| Roof panel | 0.5mmthickness corrugated steel sheet V820 | M | ||
| Skylight panel | 1.2mm thick | M | ||
| Standard Parts | Self-tapping screw, sealing Tape, sealant |
M | ||
| Non-standard Parts | Colored profile parts For the ridge, roof |
M | ||
| Gutter | M | |||
| Downpipes | M | |||
| 4 | Wall System | |||
| Wall panel | 0.45mm thick corrugated steel sheet V820 | M | ||
| Standard Parts | Self-tapping screw, sealing Tape, sealant |
M | ||
| Non-standard Parts | Colored profile parts for Edge cover, flashing |
M | ||
| Door | Colored steel panel door | M2 | ||
| Window | Plstic Steel Window | M2 | ||
| Awning | M2 | |||
| 5 | Fastners | |||
| Foundation bolts | M24X70 | SET | ||
| High strength bolts | M20 | SET | ||
| Common bolts | M12 | SET | ||
5. Market:
6. Our service:
1. Professional design and engineering team
The full solution for house design. We could make the design for the whole house as per your requirement.
2. Procurement and Manufacture for all material for prefabricated building
We have a professional procurement team to make sure all the materials are of good quality. And our factory operation under ISO standard, to make sure the fabrication works with high technology.
3. Site management & Installation supervision
We could send our engineers to help with the installation supervision, you just need to prepare a team which knows normal construction works will be OK.
7. FAQ:
Q1: What are your main products?
A: Our man products have prefab K house, T house, SHS house, H house, container house, light steel structure villa, steel structure warehouse, sentry box, sandwich panel, and other construction materials.
Q2: What will the client provide before factory offers a good quotation?
A: When we receive an inquiry from the client, the client please fills the purchasing intention sheet, providing us with information about house dimensions, draft drawing, layout and materials for the prefabricated house. We will design the drawings and offer a competitive quotation with the above information.
Q3: What are the main materials of the prefabricated house?
A: Our prefabricated house materials mainly include light steel structure, sandwich panel, roof tile, door, window, covers, screws, and other accessories.
Q4: How you calculate the total area?
A: Industry calculation rule as below:
(1) house area = exterior house length X exterior house width X floor
(2) canopy area=exterior house length X 1/2 X canopy width
(3) staircase area = 4.5 sqm X quantity of staircase
(4) corridor area = exterior house length X corridor width
(5) total area = (1) + (2) + (3) + (4) + (5)
Q5: What drawing of the house will factory supply?
A: Plan drawing, elevation drawing, sectional drawing, foundation drawing, installation drawing.
Q6: How many types of sandwich panel do you have?
A: We have EPS(polystyrene)sandwich panel, rock wool sandwich panel, and PU(polyurethane)sandwich panel.
The characteristics of your sandwich panels respectively:
1. EPS(polystyrene)sandwich panel: Thickness is 50mm, 75mm, 100mm. EPS volume weight is 80-200Kg/m3, water-proof.
2. Rock wool sandwich panel: Thickness is 50mm, 75mm, 100mm. Rock wool volume weight is 200-400Kg /m3, fire-proof, sound-insulation, heat-preservation.
3. PU(polyurethane)sandwich panel: Thickness is 50mm, 75mm, 100mm. PU volume weight is 150-300/m3 water-proof, fire-proof, heat-proof, heat-insulation, heat-preservation, sound-insulation.
Q7: How many colors do your sandwich panels have?
A: Offwhite, ivory white, blue and red color etc.
8. Customized design is welcome, it would be better if you could provide the following information:
1. Location (wind speed, snow load, temperature, shockproof rating)?
2. Size (length, width, height)?
3. How many chicken? Broiler or hens?
4. Cage or free-range?
5. Is feeder equipment to be automatic or semi-automatic?
Let's build together the world of tomorrow!
){kind=link}