EPS Cement composite panels steel factory building
steel structure workshop Introduction:
The load bearing parts for steel structure workshop are mainly steel structures, including steel columns, steel beams, steel structural basements, bracing systems for wall and roof. Steel workshops are divided into Light Steel Workshops and Heavy Steel Workshops. The Main Structure are usually made of Q345 Steel while the Purlins and Bracing System are made of Q235 Steel. They are the most common steel materials used for steel structure in China.
Advantages of Steel Structural Workshop:
1).Large span for great strength with light deadweight;
2).Short finishing time and low cost;
3).Fire proof and rust proof;
4).Convenient to assemble or disassemble.
steel structure workshop Technical Parameters:
1.Main Structure: Steel Welded H Section
2.Purlin: C Section Channel or Z Section Channel
3.Roof Cladding: Sandwich Panel or Corrugated Steel Sheet with Fiber Glass Wool Coil
4.Wall Cladding: Sandwich Panel or Corrugated Steel Sheet
5.Tie Rod: Circular Steel Tube
6.Brace: Round Bar
7.Column & Transverse Brace: Angle Steel or H Section Steel or Steel Pipe
8.Knee Brace: Angle Steel
9.Wrapping Cover:Color Steel Sheet
10.Roof Gutter: Color Steel Sheet
11.Rainspout: PVC Pipe
12.Sliding Sandwich Panel Door or Metal Door
13.Windows: PVC/Plastic Steel/Aluminum Alloy Window
14.Connecting: High Strength Bolts
Main parts and materails of steel structure workshop :
No. |
Ltem |
Spec. |
Grade |
Unit. |
| 1 |
Main Steel System |
| |
Main Steel Frame |
|
Q345B |
T |
| |
Manufacture charge |
|
|
T |
| 2 |
Secondary part Steel system |
| |
Roof purlin |
C180*70*20*2.5 |
Q235B |
T |
| |
Wall purlin |
C180*70*20*2.5 |
Q235B |
T |
| |
Brace between column, Horizontal support |
Angle steel Φ20 |
Q235B |
T |
| |
Knee bracing |
Steel Angle L50*4 |
Q235B |
T |
| |
Tie bar |
Square tubeΦ114*2.5 |
Q235B |
T |
| |
Support bar |
round tubeΦ32*2.5 |
Q235B |
T |
| |
Brace between purlin |
round barΦ12 |
Q235B |
T |
| 3 |
roof System |
| |
Roof panel |
0.5mmthickness corrugated steel sheet V820 |
|
m |
| |
Skylight panel |
1.2mm thick |
|
m |
| |
Standard Parts |
Self-tapping screw,sealing
tape,sealant |
|
m |
| |
Non-standard Parts |
Colored profile parts
for ridge,roof |
|
m |
| |
Gutter |
|
|
m |
| |
Downpipes |
|
|
m |
| 4 |
Wall System |
| |
wall panel |
0.45mm thick corrugated steel sheet V820 |
|
m |
| |
Standard Parts |
Self-tapping screw,sealing
tape,sealant |
|
m |
| |
Non-standard Parts |
Colored profile parts for
edge cover,flashing |
|
m |
| |
Door |
Colored steel panel door |
|
m2 |
| |
Window |
Plstic Steel Window |
|
m2 |
| |
Awning |
|
|
m2 |
| 5 |
Fastners |
| |
Foundation bolts |
M24x70 |
|
SET |
| |
High strength bolts |
M20 |
|
SET |
| |
Common bolts |
M12 |
|
SET |
steel structure workshop Products Display :
FIRST PART, OUR COMMENTS AND IDEAS:
1)We can supply all kinds of steel structures, steel bulding, metal building, modular house,
Steel frame for warehouse, workshop, garage etc, steel beams, other riveting and welding parts.
2)We can also make and develop new parts according to customers' drawings and detailed dimensions.
3)Specifications
a)Size: MOQ is 10m2, width X length X eave height, roof slope,you should inform us the above requests.
b)Type: Single slope, double slope, muti slope; Single span, double-span, Multi-span, single floor, double floors!
c) Base: Cement and steel foundation bolts
d) Column and beam: Material Q345(S355JR)or Q235(S235JR) steel, all bolts connection! Straight cross-section or Variable Cross-section!
e) Bracing: X or V or other type bracing made from angle, round pipe, etc
f) C or z purlin: Size from C120~C320, Z100~Z200
g) Roof and wall panel: Single colorfull corrugated steel sheet0.326~0.8mm thick, YX28-205-820(820mm wide),
Sandwich panel with EPS, ROCK WOOL, PU etc insulation thickness around 50mm~150mm, width 950mm or 960mm!
h)Accessories: Semi-transparent skylight belts, Ventilators, down pipe, outer gutter, etc
i)Surfrace: Paint or hot dip galvanize!
j) Packing: Main steel frame without packing load in 40'OT, roof and wall panel load in 40'HQ!
k)Design ParametersIf you need we design for you, pls supply us the following parameter together with detail size:
1)Live load on roof(KN/M2)
2)Wind speed(KM/H)
3)Snow load (KG/M2) if have
4)Earthquake load if have
5)Crane (if have), Crane span, crane lift height, max lift capacity, max wheel pressure
SECOND PART,OUR ADVANTAGES:
1st point,Our company could design,fabricate,suppl,install steel structure with 70meters-90meters clear span,so that the owner could use space of 70meters-90meters clear span,which meet the needs of owner's introducing crane,heavy industry equipments and other technique procedure,as a result we provide youi multiple choices for your future extentions.
2nd point,We are also professional at fabricating,supplying steel structure tourism Parkview complex buildings,Which includes tourism,recreation,food,shopping,leisure,holiday activities.
3rd point, we could fabricate,supply,export and install the following China Standard section structural steel:
W18X35 H450X160X8X12
W21X55 H530X210X10X14
W24X68 H600X230X12X16
W16X26 H400X140X8X10
W14X132 H380X380X18X26
W14X22 H350X140X6X10
W10X20 H260X150X6X10
4th point, We manufacture and supply many standards of structural steel components,such as ASTM A36 following structural section steel and other not mentioned structural section steel: W18X76,W16X77,W16X57,W14X48,W12X35,W12X26,W10X22,W10X19,W4X13,S4X9.5,MC10X22,MC2X18.7,L5X5X5/16,L4X4X3/8,L3 1/2X3 1/2X 1/4,L3X3X1/4,L2 1/2X2 1/2X1/4,L2X2X5/16,25 THK.PLATE,20 THK.PLATE,16 THK.PLATE,10 THK.PLATE.
5th point,we often make following type of steel structure of shipyard building,the following details are for our steel structure shipyard in Britain:
Delivery date: 6/10/2009.
Steel grade: Q345B.
Thickness of plates: δ6~δ40
Welding: Complete penetration of most welds.
Member description: This project includes welded H section columns, big section height welded H section crane girder. Complicated frame demand processing in whole member, with difficulties of turning and transporting of 40MT one unit. And crane girder has big section height, thick plates, high demanding in welding, and full completely penetration between flange and webs.
6th point,Because of our sincerely service attitude,truely solve the owner's difficulties,think the owner's thought as our own thought,the owner have continuously orderedsecond phase steel structure project,third phase steel structure project.
){kind=link}